Phase Technologies 2XD Series, Руководство по эксплуатации и установке

Страница: 34 / 84

28 | P a g e
Table 11
– Measured Values
DISPLAY MESSAGE DESCRIPTION OF MEASURED VALUE
Iu Iv Iw Three-phase currents on the output
OUTPUT HP Output measured in horse power
OUTPUT KWATTS Output measured in kilowatts
OUTPUT KVA Output measured in KVA
OUTPUT PF Power factor of the motor load
BUS CAP VOLTAGE Voltage of the DC bus
INPUT VOLTAGE Input voltage AC
AUX1 AUX2 ON/OFF status of the remote switch circuits AUX1 and AUX2
FREQUENCY Output frequency in Hz
MODEL NUMBER Displays the product model number
V 5VDC IN
Measures the 0-5 VDC analog control voltage between Control Terminals
for 0-5VDC input.
I_1 4-20mA IN
Measures 4-20 mA analog control current on I_1 Control Terminals for
analog current input.
I_2 4-20mA IN
Measures 4-20 mA analog control current on I_2 Control Terminals for
analog current input.
TIME UNTIL START
Displays a timer that counts down the time left to start when the drive is
in a time delay due to a fault condition.
REAL TIME CLOCK Date/Time
IGBT CASE TEMP IGBT case temperature.