Phase Technologies 2XD Series, Руководство по эксплуатации и установке

Страница: 38 / 84

32 | P a g e
To view the Restart Log:
1. Press the MENU key to scroll through menu items until RESTART LOG appears on the
display.
2. Press ENTER to access this menu item.
3. Use the up and down arrows to scroll through the faults.
4. The fault will appear on the first row of the display, followed by the number of times that fault
has occurred.
To clear the Restart Log and reset all Auto Restart fault counters:
1. Press the MENU key to scroll through the Main Menu items until CLEAR MEMORY appears
on the display.
2. Press ENTER.
3. Use the up and down arrows to find
CLEAR RESTART LOG .
4. Press ENTER to clear the Restart Log and reset all Auto Restart fault counters.
CAUTION : Clearing faults through the CLEAR MEMORY menu will clear ALL faults in the Restart
Log and all fault counters will be reset to zero. If any number of automatic restarts have been allowed
through parameters in the Auto Restart Parameters (
Table 17 ), the counter on these faults will be set to
zero.
When the drive has faulted and is programmed to automatically restart after a time delay, the display
will count down the remaining time to start. Press both up arrow and down arrow for one second to
interrupt the countdown and start the motor.
If the drive has faulted and no auto restart is allowed, the display will indicate the type of fault that has
occurred on the top line and the second line will read
RESTART? ENTER . Press ENTER to clear the
fault and restart the load.
The number and type of faults are also recorded in the Fault Log. In this Log each fault is recorded with
a time and date stamp (up to the most recent 20 faults). The Fault Log is permanent and cannot be
cleared. See
Section 4.9 for more information on the Fault Log.
4.9 Fault Log
The Fault Log is a permanent record of drive faults. The number of faults cannot be reset by the user.
Faults will be stamped with the time and date the fault occurred, up to a total of 20 times for each
particular fault. After the 20
th
fault, the oldest time-stamped fault will be replaced with the most recent.
The Fault Log is a Main Menu item. Navigate through the Main Menu items by pressing the MENU key
repeatedly until FAULT LOG appears. Press ENTER to view the list of faults, using the arrow keys to
scroll through the list. See
Figure 27 for more information on viewing the Fault Log.