PGST CT-PG-100, Руководство пользователя

Страница: 7 / 22

Please insert SIM card and power on the system by adapter, built-in speaker would make a
sound, and all icons display on the LCD, the time shows normally after all LED indicators are
ON. Signal mark with 5 grids on screen in 10 seconds means host starts up normally with
strong GSM signals. Also check whether the signal indicator flashes once every 2s; Finally,
move the backup battery switch to ON.
-9- -10-
GSM anti-theft alarm controller GSM anti-theft alarm controller
Function Setting
1.Initialization
Input 4-digit administrator password on the host and press [#] button to confirm. You will
hear a voice prompt: please enter instruction. At the same time,
［- - - -］
displays on the screen,
indicating the system enters setting status. You can perform different settings repeatedly as
long as the system keeps in setting status. The system will exit setting mode and return to
normal status
in 35s once you stop doing any operations
.
2
.
System Setting
Notes: The system default administrator password is [6666].
Operating method: [XXXX] [#]
X indicates: 4-digit admin password
LCD display
：
3
.
Exit Setting
Press [*] button if you want to exit setting state after finishing setting or return to former
operation, the host would make a “tick” sound and setting is finished.
Operating method: press [*] button
4.Coding of Remote Controller Setting
In setup state, input number [21] , then press [#] to confirm. The host make a “tick” sound
and you will hear “remote control coding” .the [ ] indicator is on without flashing; Press any
button on the wireless remote controller, The host makes a “tick” sound, and then a voice
prompts “setting completed”. [ ] indicator goes out, indicating the remote controller succeeds
in coding. The code of next remote controller will be displayed on the LCD screen
automatically, when coding completed.
Operating method: [21] [#]
LCD display
：
Notes: The same remote controller
could be coded just once.
You can add maximum 5 remote
controllers.
5
.
Remote Controller Deleting Setting
In setup state, use keypad to enter [22], then press [#] to confirm. The host makes a “tick”
sound, and then a voice prompts “setting completed”.
Operating method: [22] [#]
LCD display
：
6.Coding of Wireless Detector Setting
In setup state, input number [23], and input the defense zone number you want to code
[02~99], and then press [#] to confirm. LCD would show the defense zone accordingly. You will
hear a voice prompt “detector coding”. Then trigger a wireless detector to emit a wireless
signal; after receiving the signal, the host makes a “tick” sound, and then a voice prompts
“setting completed”. , the [ ] indicator goes out at the same time.