PGST CT-PG-100, Руководство пользователя

Страница: 12 / 22

-19- -20-
GSM anti-theft alarm controller GSM anti-theft alarm controller
19.Host Keypad Lock Setting
In setup state, enter [40], then input [0/1], finally press [#] to confirm. The host makes a “tick”
sound, and then a voice prompts “setting completed”.
Operating: [40] [X] [#]
X=“0” indicates: off
X=“1” indicates: on
Example: Open the keypad lock
Operating: [40] [1] [#]
LCD display
：
21. Host Timing Arm /Disarm Setting
In setup state, enter [42], and then input disarming time [AABB], and then input arming time
[XXYY], finally press [#] to confirm. The host makes a “tick” sound, and then a voice prompts
“setting completed”.
Operating: [42] [AABB] [XXYY] [#]
“AABB” indicates: disarming time—hour and minute
“XXYY” indicates: arming time—hour and minute
Example: set disarming to 8:20 and arming time to 20:30
Operating: [42] [0820] [2030] [#]
LCD display
：
20.Host Timing Arm/Disarm Enable/Disable Setting
In setup state, enter [41], then choose on/off auto Arm or Disarm function key
［
1/0
］,
finally
press [#] to confirm. The host makes a “tick” sound, and then a voice prompts “setting
completed”. Factory default: off.
Operating: [41] [1/0] [#]
X=“0” indicates: off
X=“1” indicates: on
Example: Turn on timing Arm/Disarm function
Operating: [41] [1] [#]
LCD display
：
22.Host Reset Setting
In setup status, first enter [43], then press [#] to confirm. The host makes a “tick” sound, and
then a voice prompts “setting completed”.(Remote controllers and detectors would not be
deleted).
Operating: [43] [#]
LCD display
：