PGST CT-PG-100, Руководство пользователя

Страница: 10 / 22

-15- -16-
GSM anti-theft alarm controller GSM anti-theft alarm controller
12.Siren Ring Time Setting
In setup state, enter [32], then input time [00~15] minutes, finally press [#] to confirm; The
host makes a “tick” sound, and then a voice prompts “setting completed”. Default: 3 minutes
Operating method: [32] [XX] [#]
XX indicates: siren ring time, unit: minute
Example: Set 2 minutes of siren ring time
Operating method: [32] [02] [#]
LCD display
：
14.Defense Zone Alarm Time Delay Setting
In setup state, enter [34], then input defense zone [02~99], last input delayed time [00~99]
seconds, press [#] to confirm; The host makes a “tick” sound, and then a voice prompts “setting
completed”. Default: no delay
Operating method: [34] [XX] [YY] [#]
XX indicates
：
Defense zone
YY indicates
：
Delayed alarm time, unit: second
Example: Detailed operating of 5 seconds delayed alarm time for defense zone 05
Operating method: [34] [05] [05] [#]
LCD display
：
13
.
Arm Time Delay Setting
In setup status, enter [33], then input delayed time [00~99] seconds, finally press [#] to
confirm; The host makes a “tick” sound, and then a voice prompts “setting completed”. Thus
arm time delayed setting is finished
Operating method: [33] [XX] [#]
XX indicates
：
Arm delayed time, unit: second
Example: detailed operating of 2 seconds delayed time arm
Operating method: [33] [02] [#]
LCD display
：
15.Telephone Dial-up Cycle Times Setting
In setup state, enter [35], then input dial-up times [00~09], finally press [#] to confirm; next
the host makes a “tick” sound, and then a voice prompts “setting completed”. Default: 9 times
Operating method: [35] [XX] [#]
XX indicates: Telephone dial-up cycle times
Example: Detailed operating about 2 cycle times
Operating method: [35] [02] [#]
LCD display
：