Flying The Machine Upside Down
• If you want to hang the PFX1500V upside down the fog liquid container needs to be moved.
• Remove the 2 screws holder the top plate of the fluid container.
• Remove the cap and tube for the liquid container.
• Remove the liquid container.
• Turn the machine upside down.
• Remove the base plate. (A)
• Turn the machine again to its normal position. Put the base plate this side.
• Turn the machine upside down again.
• Install the liquid container back inside.
• Install the top plate back on.
• Hang the smoke machine via the 3 M10 fixing points, either with clamps, eye bolts or stud. (B)
• Make sure you use a safety chain or wire as a secondary support.
Maintenance:
• Do not allow liquid to become contaminated. Always replace the cap on the liquid container immediately
after filling.
• After every 40 hours of operation, or if the unit is not to be used for one month, It is recommended to run a
cleaning solution of 20% clear vinegar and 80% distilled water through the system to prevent clogging in the
heater. This should be carried out in a well-ventilated room.
• Always empty the fluid and water tanks after every use. Use a dry cloth to wipe down the outside of the fog
machine. Make sure the power cable is disconnected from the mains supply.
• Make sure the mains cable is in impeccable condition and should be replaced when a small defect is
detected.
• All other maintenance should be carried out by a qualified engineer
A
B
