User Manual
PFX1500V
Dear Customer,
Thank you for purchasing the Perform FX PFXLOWFOG 1500. With decades of experience in design and
production, Perform FX are one of the leading manufacturers of professional effects and lighting equipment.
This fog machine has been designed and manufactured to the highest of standards, so you can be assured you
have made a good investment.
For your safety and to ensure you make full use of all the features available, please make sure you read this
manual in full.
Important Safety Advice:
• You must read this manual in full before commencing operation.
• The machine should be operated by a responsible and competent adult only.
• Keep this manual in a safe place for future reference.
• Heed all warnings and instructions, both in this manual and on the product.
• Carry and transport this product with care.
• Impact to this machine or dropping may result in serious mechanical failure. The machine should not be
used if it has been subjected to such incident.
• Turn off and unplug this machine from the mains supply when not in use.
• This machine is not water-proof and should not be used outside.
• In the event of any liquid entering the housing, unplug immediately & contact a qualified engineer.
• You must not attempt to modify this unit
• The manufacturer accepts no responsibility for injury or damage caused as a result of not following the
manual provided.
Protection from Electric Shock:
• Only connect this unit to a mains socket with suitable trip and RCD protection.
• To disconnect from the mains socket, always remove by the mains plug. Do not attempt to remove by
pulling the mains cable.
• Disconnect the unit from the mains supply before cleaning. Cleaning should be carried out with a soft, dry
cloth.
• Do not submerge or expose this machine to any liquid.
• Do not operate near exposed water or in high humidity.
• Choose a suitable route for mains cables, ensuring trip hazards are avoided and the mains cable is not at
risk of being crushed.
• Do not open this unit to service. There are no user-serviceable parts inside. Any servicing or repairs should
be carried out by a qualified engineer only. Any attempt to service or adapt this unit will leave your
warranty void and could result in serious malfunction or injury.
Protection from Fire:
• Do not place near sources of heat or ignition.
• Do not cover or block any ventilation holes.
• Check your AC wall socket will take the power you are applying to avoid overloading the mains supply.
Protecting Your Machine From Damage:
• Always install in a suitable location where vibrations to the unit are avoided.
• Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
