background image

• In the event that any object or liquid enters the machine switch off immediately, remove from mains and 

consult a qualified engineer.

• Should you experience any malfunction or damage to the mains cable, disconnect from the mains supply 

immediately and consult a qualified engineer.

• All parts should be replaced with genuine spare parts and carried out by a qualified engineer.

• Do not add liquids of any kind, especially flammable liquids to this machine or its intended fluid.   Use only 

water based fluid, specifically designed for effects machines. 

• Use high quality water-based liquid, recommended by your dealer to reduce clogging.

• During operation ensure there is sufficient fluid in the tank. Operating without fluid will damage the pump.

• If your machine fails to work disconnect immediately, remove all liquid and return in original packing to 

your dealer.

• Always drain the fluid and water tanks before transporting.

• Follow the cleaning and maintenance advice in this manual.

• If your machine fails to work, disconnect immediately, remove all liquid and return in original packing to 

your dealer.

Danger of Injury or Burns:

• For operation by adults only, ensure installation is away from the reach of children.

• Never leave the machine running unattended.

• Avoid all contact with the heater.

• Never aim the nozzle directly at people.

• Use only in a well ventilated area & do not cover the machine vents. In order to guarantee adequate 

ventilation, allow a free air space of at least 20cm around all sides of the machine.

• Effects fluids can cause irritation and injury, handle with care and keep out of the reach of children. Avoid

contact with the eyes and skin, if this occurs rinse with warm water.  If ingested call a doctor immediately.  

Before Use:

Before commencing setup check the machine has not been damaged in transit. In the event there is any

damage to the housing, cable or internal components contact your dealer immediately.

Contents Includes:

PFX1500V

Power Cable

Wireless remote and receiver

Instructions

Specifications:

Code: PFX1500V

Mains Supply: 230 Vac 50Hz

Power Consumption: 1500 Watts

Heat Up Time: 4 min

Dimensions: 490 x 390 x 280mm

Weight: 8.5Kg

Features:

• Powerful vertical fog output.

• Vertical blast of around 6 metres.

• Red, Green and Blue LED colour mixing lights.

• Six high efficiency 3 watt tri LEDs.

• DMX controllable, 5 Control Channels.

• Wireless Remote Control

Содержание PFX1500V










Отзывы: