FORCED ACTION MIXER PFT MULTIMIX Overview – Operation – Spare Parts Lists
Machine preparations
Page 18
23.04.2018
21 Machine preparations
21.1 Risk of injury due to rotating mixing arms
Before operating the machine, carry out the following work
steps as preparation:
DANGER!
Rotating mixing arms!
Risk of injury if reaching close to rotating
mixing arms.
The protective grille (1) and mortar outlet
(2) should not be removed while preparing
or operating the machine.
Never reach into the machine
while it is running.
1
2
Fig. 17: Protective
grille
Fig. 18: Mortar outlet
Fig. 19: Setting up the machine
Install the machine on stable and even ground and secure it
against accidental movements:
Do not tilt or roll the machine away.
Place the machine where it cannot be hit by any
falling objects.
The operating element must be freely accessible.
Keep a free space of approx. 1.5 metres around
the machine.
22 Connection to the 400 V power supply
Fig. 20: Connecting the power
Only connect the machine to three-phase current with 400 V.
DANGER!
Danger of death due to electric current!
The electrical connection must be fused
correctly:
Only connect the machine to a power source
with an approved FI circuit breaker (30 mA)
RCD (residual current device) of type “A”.