FORCED ACTION MIXER PFT MULTIMIX Overview – Operation – Spare Parts Lists
Environmental protection
23.04.2018
Page 31
23.04. 2018
Fig. 42: Setting the mixing arm
The interval between the scraper and the material hopper should
total 1.5 times the granulate size.
37.4 Motor and gearbox maintenance
Fig. 43: Maintenance
No other maintenance tasks need to be performed on the motor
and gearbox.
37.5 After performing maintenance
After maintenance has been completed, carry out the following steps
before switching on.
1.
Check that all previously loosened screw connections have
a tight fit.
2.
Check that all previously removed protective devices
and covers have been properly reattached.
3.
Ensure that all tools, materials and other equipment have been
removed from the work area.
4.
Clean the work area and remove any traces of escaped material
(e.g. liquids, processing material etc.).
5.
Ensure that all safety devices are functioning properly.
38 Environmental protection
Environmental protection
Observe the following environmental protection guidelines
when carrying out maintenance work:
Remove used, leaking or excess grease from all manual
lubrication points and dispose of it correctly according to
the applicable local regulations.
Collect used oil in suitable containers and dispose of it
according to the applicable local regulations.
