PFT G 5 c FU, Руководство по эксплуатации

Страница: 54 / 56

PFT G 5 c FU 230V Operating Manual Issued: 09.2007
Knauf PFT GmbH & Co. KG
54
Check list for annual inspection by specialist (master copy)
This inspection must be carried out once a year by a specialist in accordance with ZH1/575.
The machine and control box receive an inspection label as verification of this inspection.
The inspection protocol is to be presented on demand.
Date of inspection: Inspector:
Signed: Machine number:
Component Inspection item OK Rework/
replace
Material hopper Check all welded seams for cracks.
Material hopper Destroyed by corrosion or deformation?
Mixing area Check wall of tube for wear.
(minimum wall thickness of 1.5 mm)
Mixing shaft Check mixing area for wear.
Mixing shaft Check pump coupling for wear.
Protective grille Is protective grille still evenly flat?
Frame Check all welded seams for cracks.
Frame Check whether all screwed joints are firmly seated.
Frame Check for deformation. Stability must be ensured.
Frame Plastic feet okay?
Castors Do the castors turn with ease?
Water flow meter Is the inspection glass still clearly transparent and
sealed?
Solenoid valve Functional check
Pressure reducing
valve Functional check (at 1.5 bar setting).
Control box Visual inspection for defects.
Control box Functional check
Control box Are all labels in legible condition?
Control box High voltage test with 1000 V
Control box Functional check of all safety switches.
Control box Functional check of all control lamps.
Control box Check whether all cable connections are firmly seated.
Type plate Available and legible
Operating
instructions Available
Mortar pressure
gauge Functional check