PFT LOTUS XL light 400 V Overview – Operation – Spare Parts Lists
Preparation of the machine
22
2017-01-16
Basic information
WARNING!
Danger of injury due to improper operation!
Improper operation can lead to serious injuries
or equipment damage.
Therefore:
Carry out all operating steps as described this
operating manual.
Before starting any work, ensure that all covers
and protective devices are installed and functioning
properly.
Never disable protective devices during operation.
Keep the operating area clean and tidy.
Components and tools that are stacked on one
another or left lying around can cause accidents.
An increased noise level can cause permanent
hearing loss. Operation can result in noise that
exceeds 78 dB (A) in close proximity to the
machine. Close proximity is defined as the area
within 5 metres of the machine.
18 Preparation of the machine
Before operating the machine, carry out the following work
steps as preparation:
Fig. 22: Mortar outlet
DANGER!
Rotating dosing shaft
Reaching into the mortar outlet poses a risk of injury.
– The mortar outlet (1) should not be removed
while preparing or operating the machine.
- Never reach into the machine while it is running.
Fig. 23
: Set-up
The controls must be freely accessible.
Place the machine where it cannot be hit by any falling objects.
1
