13
Modules
5.8
Module 8: "fixed_value_in"
With this module an additional parameter can be read the parameter number of which
is stated in the parameter data (low byte first). The input data then contain the current
value. As to the possible parameters
see Chap. 11., page 17
.
Input data:
Configuration data:
41h, C0h, 08h
Parametering data:
5.9
Module 13: "fail_safe"
Through this module you can state which actions the TIC shall perform in the Profibus
status „fail_safe“, for example switch pump off in case the Profibus connection fails. In
the parameter data, the parameter number and the parameter value are stated which
shall be written in this case. As to the possible parameters
see Chap. 11., page 17
. This
module can be used up to four times in the configuration.
Configuration data:
00h
Parametering data:
Byte
0
1
Parameter value
low byte
high byte
Byte
0
1
Parameter number
low byte
high byte
Please note
☞
Please note that your Master may possibly attain during starting of the Profibus the sta-
tus "fail_safe" and that because of this these modules are run.
Byte
0
1
2
3
Parameter number
Parameter value
low byte
high byte
low byte
high byte
