Pfeiffer Vacuum HEPTA 100 P, Руководство по эксплуатации

Страница: 4 / 72

5.11.2Connect three phase motor with 9-pin terminal board 33
5.11.3Connect three phase motor with 12-pin terminal board 33
5.12 Checking the direction of rotation 34
5.13 Connecting the PTC thermistor tripping unit 35
5.14 Connecting operating temperature monitoring 36
6 Operation 38
6.1 Commissioning the vacuum pump 38
6.2 Switching on the vacuum pump 38
6.3 Conveying condensable vapors 39
6.4 Flushing the screw pump with fluid 40
6.5 Flushing the screw pump with gas 40
6.6 Switching off the vacuum pump 40
7 Maintenance 41
7.1 Maintenance information 41
7.2 Checklist for inspection and maintenance 42
7.3 Checking the lubricant level 42
7.4 Checking the cooling liquid level 43
7.4.1 Approach for the Hepta 100 P 43
7.4.2 Approach for the Hepta 200 P | 300 P 44
7.5 Changing the lubricant 44
7.5.1 Draining lubricant on the motor side 45
7.5.2 Draining lubricant on the vacuum side 46
7.5.3 Filling lubricant on the motor side 47
7.5.4 Filling lubricant on the vacuum side 47
7.6 Changing the cooling liquid 48
7.6.1 Draining the cooling liquid on the Hepta 100 P 48
7.6.2 Draining the cooling liquid on the Hepta 200 | 300 P 49
7.6.3 Filling up the cooling liquid on the Hepta 100 P 50
7.6.4 Filling up the cooling liquid on the Hepta 200 P | 300 P 51
8 Decommissioning 52
8.1 Decommissioning the vacuum pump 52
8.2 Recommissioning 52
9 Recycling and disposal 54
9.1 General disposal information 54
9.2 Disposing of the screw pump 54
10 Malfunctions 55
11 Service solutions by Pfeiffer Vacuum 57
12 Accessories 59
12.1 Accessory information 59
12.2 Ordering accessories 59
12.3 Consumables 59
13 Technical data and dimensions 60
13.1 General 60
13.2 Substances in contact with the media 60
13.3 Technical data 60
13.4 Dimensions 63
Declaration of conformity 68
Table of contents
4/70