Pfeiffer Vacuum HEPTA 100 P, Руководство по эксплуатации

Страница: 3 / 72

Table of contents
1 About this manual 7
1.1 Validity 7
1.1.1 Applicable documents 7
1.1.2 Variants 7
1.2 Target group 7
1.3 Conventions 7
1.3.1 Instructions in the text 7
1.3.2 Pictographs 8
1.3.3 Stickers on the product 8
1.3.4 Abbreviations 9
1.4 Trademark proof 9
2 Safety 10
2.1 General safety information 10
2.2 Safety instructions 10
2.3 Safety precautions 13
2.4 Limits of use of the product 13
2.5 Proper use 14
2.6 Foreseeable improper use 14
2.7 Personnel qualification 14
2.7.1 Ensuring personnel qualification 14
2.7.2 Personnel qualification for maintenance and repair 15
3 Product description 16
3.1 Function 16
3.1.1 Water cooling 17
3.1.2 Temperature monitoring 17
3.1.3 Thermometer 17
3.1.4 Shaft seal on motor side and vacuum side 17
3.1.5 Gas ballast 17
3.1.6 Sealing gas system 17
3.2 Identifying the product 17
3.3 Product features 17
3.4 Scope of delivery 18
4 Transportation and Storage 19
4.1 Transport 19
4.2 Bearing 20
5 Installation 21
5.1 Setting up the vacuum pump 21
5.2 Connecting the vacuum side 21
5.3 Connecting the exhaust side 22
5.4 Connecting the cooling water supply 23
5.5 Connecting the sealing gas system 24
5.6 Connecting the gas ballast system 25
5.7 Connecting the flushing gas system 26
5.8 Installing the coupling 27
5.9 Filling the cooling liquid 27
5.9.1 Filling up the cooling liquid on the Hepta 100 P 28
5.9.2 Filling up the cooling liquid on the Hepta 200 P | 300 P 29
5.10 Filling with lubricant 29
5.10.1Filling up lubricant on the motor side 30
5.10.2Filling lubricant on the vacuum side 31
5.11 Connect to mains power supply 31
5.11.1Connect three phase motor with 6-pin terminal board 32
Table of contents
3/70