Pfeiffer Vacuum HENA 201 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 60

Pfeiffer Vacuum HENA 201 Скачать руководство пользователя страница 7

1 About this manual

IMPORTANT

Read carefully before use.
Keep the manual for future consultation.

1.1 Validity

These operating instructions are for customers of Pfeiffer Vacuum. They describe the function of the
designated product and provide the most important information for safe usage of the product. The de-
scriptions comply with applicable directives. All information provided in these operating instructions refer
to the current development status of the product. The documentation remains valid as long as the cus-
tomer does not modify the product in any way.

1.1.1 Applicable documents

Document

Number

Declaration of conformity

A component of these instructions

You can find this document in the

Pfeiffer Vacuum Download Center

.

1.1.2 Variants

These instructions apply to HenaLine vacuum pumps.

Pump type

Pump version

Hena 201

Standard version of rotary vane pump

Hena 251

Standard version of rotary vane pump

Hena 301

Standard version of rotary vane pump
Rotary vane pump with water cooling

Hena 301 S

Rotary vane pump with limited intake pressure

1.2 Target group

These operating instructions are aimed at all persons performing the following activities on the product:

● Transportation
● Setup (Installation)
● Usage and operation
● Decommissioning
● Maintenance and cleaning
● Storage or disposal

The work described in this document is only permitted to be performed by persons with the appropriate
technical qualifications (expert personnel) or who have received the relevant training from Pfeiffer Vac-
uum.

1.3 Conventions

1.3.1 Instructions in the text

Usage instructions in the document follow a general structure that is complete in itself. The required ac-
tion is indicated by an individual step or multi-part action steps.

Individual action step

A horizontal, solid triangle indicates the only step in an action.

► This is an individual action step.

About this manual

7/60

«
...
5
6
7
8
9
...
»

Содержание HENA 201





























































Отзывы:

Нет отзывов