Pfeiffer Vacuum HENA 201 Скачать руководство пользователя | Manualshive

Страница: 13 / 60

background image

CAUTION

Scalding from hot operating fluid

Danger of burns when draining operating fluid if it comes into contact with the skin.

► Wear protective equipment.
► Use a suitable collection vessel.

CAUTION

Danger of burns on hot surfaces

In the event of a fault, the surface temperature of the vacuum pump can increase to above 105 °C.

► Allow the vacuum pump to cool down before carrying out any work.
► Wear personal protective equipment if necessary.

CAUTION

Danger of injury from moving parts

After a power failure or a standstill as a result of overheating, the motor restarts automatically. There
is a risk of injury to fingers and hands if they enter the operating range of rotating parts.

► Safely disconnect motor from the mains.
► Secure the motor against reactivation.
► Dismantle the vacuum pump for inspection, away from the system if necessary.

2.3 Safety precautions

Duty to provide information on potential dangers

The product holder or user is obliged to make all operating personnel aware of dangers
posed by this product.
Every person who is involved in the installation, operation or maintenance of the product
must read, understand and adhere to the safety-related parts of this document.

Infringement of conformity due to modifications to the product

The Declaration of Conformity from the manufacturer is no longer valid if the operator
changes the original product or installs additional equipment.

● Following the installation into a system, the operator is required to check and re-evalu-

ate the conformity of the overall system in the context of the relevant European Direc-
tives, before commissioning that system.

General safety precautions when handling the product

► Observe all applicable safety and accident prevention regulations.
► Check that all safety measures are observed at regular intervals.
► Do not expose body parts to the vacuum.
► Always ensure a secure connection to the earthed conductor (PE).
► Never disconnect plug connections during operation.
► Observe the above shutdown procedures.
► Keep lines and cables away from hot surfaces (> 70 °C).
► Never fill or operate the unit with cleaning agents or cleaning agent residues.
► Do not carry out your own conversions or modifications on the unit.
► Observe the unit protection class prior to installation or operation in other environments.
► Provide suitable touch protection, if the surface temperature exceeds 70 °C.

Safety

13/60

«
...
11
12
13
14
15
...
»

Содержание HENA 201





























































Отзывы:

Нет отзывов

Похожие инструкции для HENA 201

Бренд: G&F Manufacturing Страницы: 17

Бренд: Kärcher Страницы: 18

Nessie Plug&Spray NPS 1CS

Бренд: Danfoss Страницы: 12

WILDEN P100 Advanced Plastic

Бренд: PSG Dover Страницы: 28

Бренд: Graco Страницы: 20

Бренд: Wilden Страницы: 43

LARIUS VEGA 5:1

Бренд: Samoa Страницы: 28

Бренд: Seisco Страницы: 20

Бренд: Daikin Страницы: 12

Clean Jet 800 Plus + Kit

Бренд: T.I.P. Страницы: 140

Бренд: Bryant Страницы: 6

Бренд: Duratech Страницы: 14

SmartGarden 3500 KF

Бренд: T.I.P. Страницы: 32

Бренд: Daikin Страницы: 52

smart clima 12170027

Бренд: Tecnosystemi Страницы: 8

Бренд: Ulvac Страницы: 34

Бренд: Ulvac Страницы: 26

Бренд: Ulvac Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды