Pfeiffer Vacuum HENA 201 Скачать руководство пользователя страница 39

Страница: 39 / 60

6. Pull the filter unit completely out of the operating fluid separator.
7. Dismantle the clamping plate.
8. Replace the exhaust filters.

7.4.2 Mounting the exhaust filters

Prerequisites

● Vacuum pump switched off
● Vacuum pump vented to atmospheric pressure
● Vacuum pump cooled

Required consumables

● Maintenance kit – Maintenance level 2

Required tools

● Socket key,

WAF 13

● Allen key,

WAF 6

● Calibrated torque wrench (tightening factor ≤ 2.5)

1.1

3.1

Fig. 19:

Mounting the exhaust filters

Exhaust filter

Filter material

1.1 O-ring

Fixing bolts

Clamping plate

Flat seal

Filter unit

Separator cover plate

3.1 O-ring

Screws

Operating fluid separator

Procedure

1. Place the new O-ring on the front side of the exhaust filters.
2. Mount the exhaust filters using the clamping plate.

– The installation orientation is identifiable by an arrow on the filter.
– The arrow must point upwards (

↑

3. Place the new O-ring on the front side of the filter unit.
4. Insert the pre-assembled filter unit into the operating fluid separator.
5. Insert the new filter material into the housing groove of the operating fluid separator and fix it with

the fixing bolts at the same time.

Maintenance

39/60

Содержание HENA 201





























































Результаты поиска

Содержание HENA 201

Отзывы:

Pfeiffer Vacuum HENA 201, Руководство по эксплуатации, Страница: 39 / 60

Результаты поиска

Содержание HENA 201

Отзывы: