Pfeiffer Vacuum ACP 28 CP, Руководство по эксплуатации

Страница: 14 / 56

3 Transportation and Storage
3.1 Receipt of the product
Condition of the delivery
● Check that the product has not been damaged during transport.
● If the product is damaged, take the necessary measures with the carrier
and
notify the manufacturer.
► Keeping the product in its original packaging so it stays as clean as it was when dispatched by us.
Only unpack the product once it has arrived at the location where it will be used.
► Keeping the blanking plates in place on the inlet, exhaust and purge ports while the product is not
connected to the pumping line.
Keeping the packaging (recyclable materials) in case the product needs to be
transported or stored.
3.2 Handling
WARNING
Risk of crushing when the product is suspended
Given the heaviness of the product, there is a risk of crushing during handling operations involving
lifting devices. Under no circumstances shall the manufacturer be liable if the following instructions
are not followed:
► Only qualified staff trained in handling heavy objects are authorized to handle the product.
► The lifting devices provided
must be used and the procedures set out in this document must be
followed.
WARNING
Risk of crushing related to product tilting
Although the product fully complies with the EEC safety regulations, there is a risk of tilting when it is
moved over the floor or is not properly secured.
► Do not place the product on an inclined plane.
► Place it on a flat, hard floor.
► Do not push the product sideways.
Handling the pump using a hoist
1. Use a lifting device suitable for the product’s weight.
2. Use a 2-strap sling with the following characteristics:
Transportation and Storage
14/56