Pfeiffer Vacuum ACP 28 CP, Руководство по эксплуатации

Страница: 13 / 56

2.1.2 Precautions
Duty to provide information on potential dangers
The product holder or user is obliged to make all operating personnel aware of dan-
gers posed by this product.
Every person who is involved in the installation, operation or maintenance of the
product must read, understand, and adhere to the safety-related parts of this docu-
ment.
Infringement of conformity due to modifications to the product
The Declaration of Conformity from the manufacturer is no longer valid if the opera-
tor changes the original product or installs additional equipment.
● Following installation into a system, the operator is required to check and re-
evaluate as necessary the conformity of the overall system in the context of the
relevant european Directives before commissioning that system.
Only qualified personnel trained in safety regulations (EMC, electrical safety, chemical pollution) are au-
thorized to carry out the installation and maintenance described in this manual. Our service centers can
provide the necessary training.
► Do not expose any part of the human body to the vacuum.
► Comply with all safety and risk prevention instructions in accordance with local safety standards.
► Regularly check compliance with all precautionary measures.
► Do not remove the blanking plates sealing the inlet and exhaust ports if the product is not con-
nected to the pumping line.
► Do not operate the product unless the inlet and exhaust are connected to a vacuum and exhaust
pumping line.
2.2 Intended use
● The vacuum pump should only be used to generate a vacuum while pumping gases.
● The vacuum pump is designed to operate in industrial environments.
● The product may be used in a laboratory environment.
● The G version is used to pump
traces of corrosive gases .
2.3 Foreseeable misuse
Misuse of the product will render the warranty and any claims void. Any use, whether intended or not,
that diverges from the uses already mentioned will be treated as non-compliant; this includes but is not
limited to:
● Pumping of flammable and explosive mixtures
● Pumping of corrosive gases (exception: pumps in G version for traces of corrosive gases)
● Pumping liquids
● Pumping dust particles
● Using the vacuum pump to generate pressure
● Using the pump in potentially explosive areas
● Using accessories or spare parts not mentioned in these operating instructions
The product is not designed to carry people or loads and should not be used as a seat, stepladder or
similar.
Safety
13/56