Pfaff 3827-4/33, Инструкция по эксплуатации, Страница: 39 / 100

Sewing
10 - 6
2nd shoulder seam
The values (seam sections) for the 2nd shoulder seam are taken over as a mirror image of
the 1st shoulder seam.
●
Insert the workpiece and sew the seam using the pedal function, see Chapter 7.02
Pedal .
The start and end backtacks and thread trimming functions are carried out automatically.
The programmed sewing function is switched off automatically.
2nd side seam
●
Insert the workpiece and sew the seam using the pedal function, see Chapter 7.02 Pedal.
●
At the end of the seam trigger off the end backtack and thread trimming functions using
the pedal, see Chapter 7.02 Pedal .
10
.04
Error messages
If a fault occurs, the text "ERROR" appears on the display, together with an error code and
short instructions. An error message is caused by incorrect settings, faulty elements or
seam programs as well as by overload conditions.
For an explanation of the error codes see Chapter 12.08 Explanation of the error
messages.
●
Correct the error.
●
Acknowledge error correction by pressing the TE/Speed key.
ERROR
1
PRESS TE/SPEED