Pfaff 3574-2/02, Инструкция по эксплуатации

Страница: 40 / 90

Programming
11 - 11
11
.04.04
Functions for block and pattern manipulation
Block
(not available yet)
Move pattern
An entire seam pattern can be moved with this function.
Example:
Supporting point 2 is moved to 2'. Beginning at supporting point 2', all of the coordinates are
then changed proportionately.
1
2
3
2'
4
4'
1
2
3
2'
4
3'
Manipulate pattern
(not available yet)
Coordinates reference point
The current coordinate values are set to "0".
11
.04.05
Functions in INSERT mode
Straight line
When the function is active, a straight line can be entered. The stitch length must be
defined.
Stitch/feed motion
When the function is active, a single stitch can be entered independent of the stitch length.
Curve
When the function is active, a curve can be entered.
Graphics menu
When the function is active, a menu with other functions is available.
Standard stitch length
Input of a stitch length which can be changed via the stitch length change (control panel)
function.
Stitch length
Input of a stitch length which cannot be changed via the control panel.
379
380
381
189
X
Y
147
106
1
378
292
F1