Mounting and commissioning the machine
8 - 3
8
.01.04
Mounting the reel stand
●
Mount the reel stand according
to
Fig. 8-04
.
●
Then insert the reel stand in the frame
and secure with the enclosed nuts.
Fig. 8 - 04
8
.02
Commissioning the machine
When the machine is commissioned, the zero point of the jig control must be
checked and adjusted, if required. (See
chapter 8.04 Checking/setting zero
point
).
●
Check the machine, in particular the electrical cables and pneumatic connecting hoses
for any damage.
●
Clean the machine thoroughly and then oil machine and/or fill with oil (see
chapter 12
Care and maintenance
).
●
Have specialists ensure that the machine can be operated with the available electricity
supply and that it is connected correctly to the power supply (see
chapter 3
Specifications
). If not, the machine
must not
be operated.
●
Connect the machine to the compressed air system and adjust the compression (see
chapter 12.04 Checking and adjusting air compression
).
8
.03
Turning the machine on/off
●
Turn the machine on/off (see
chapter 7.01 On/off switch
).
●
Check air compression and adjust if required (see
chapter 12.04 Checking and
adjusting air compression
).
Содержание 3574-2/02
Страница 1: ...296 12 17 977 Betriebsanleitung engl 11 96 3574 2 02 Instruction Manual...
Страница 89: ...Notes...
