manualshive.com logo in svg

Pfaff 3574-2/02, Инструкция по эксплуатации

Поделиться
Скачать
Pfaff 3574-2/02 Скачать руководство пользователя страница 13

Transport, packaging and storage

5

Transport, packaging and storage

5

.01

Transport to the customer’s premises

Within Germany, the machine is delivered without packaging.

Machines for export are packaged.

5

.02

Transport within the customer’s premises

The manufacturer bears no liability for transport within the customer’s premises or to the

individual locations of use.

Always ensure that the machine is only transported upright.

5

.03

Disposal of the packaging

The packaging of these machines consists of paper, cardboard and VCE fiber.

The proper disposal of the packaging is the responsibility of the customer.

5

.04

Storage

The machine can be stored for up to 6 months if not in use. During this time it should be

protected from dust and moisture.

For longer storage the individual parts of the machine, especially the moving parts, should

be protected agains corrosion, e.g. by a film of oil.

5 - 1

Содержание 3574-2/02



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды