Pfaff 3519-5/01, Инструкция по эксплуатации, Страница: 82 / 158

Adjustment
82
13
.06.06
Manual cutting control
Rule
Two threads must be cut cleanly on both the left and right in the thread catcher cutout 1.
●
Fit the needle plate.
●
Manually move the thread catcher 1 to its front turning point.
●
Pull a double-up length of thread and hook it in the thread catcher cutout.
●
Carry out the cutting operation manually.
●
If the threads are not cut according to the rule , align the thread catcher 1 (screws 2 ) to
the knife 3 accordingly.
●
Move the stop 4 until it abuts the thread catcher 1 and tighten the screws 5.
●
Chapter 13.06.03 Checking and if necessary adjusting the lateral alignment of the
thread catcher
.
1
4
2
2
5 5
3
1
Fig. 13 - 15