manualshive.com logo in svg

Pfaff 3519-5/01, Инструкция по эксплуатации, Страница: 10 / 158

Поделиться
Скачать
Pfaff 3519-5/01 Скачать руководство пользователя страница 10

Safety

10

1

.06 

Danger warnings

A work area of 

1 

m must be kept free in front of and behind the machine to 

ensure unobstructed access at all times.

Do not reach into the work area of the machine during the sewing operation! 
Risk of injury from the needles in the sewing head and feed unit!

Do not allow any objects to be placed on the table during the adjustment work! 
The objects could become jammed or be slung away!  
Risk of injury from parts flying around!

Do not look at the laser beam with or without optical aids! 
Risk of retinal injuries to the eye from the concentrated light!

Only operate the machine with the closed covers 

1 

and 

2!  

Risk of injury from moving machine parts!

The emergency stop push-button 

3 

is used to stop the machine immediately in 

emergency situations.

Fig. 1 - 01

1

2

3

5

4

Содержание 3519-5/01































































































































































Отзывы:

Нет отзывов