Pfaff 3519-5/01, Инструкция по эксплуатации, Страница: 27 / 158

Set-up
27
●
Switch on the machine, see chapter 8.03 Switching the machine on / off .
●
Call up the threading aid function.
The workholder bar moves out of the needle area, the presser foot is lowered and the
sewing start is disengaged.
●
Loosen the screw 1 and insert the needle 2 into the needle bar until you feel it stop.
●
Adjust the needle
2
so that the long needle groove is pointing forwards and tighten the
screw 1.
●
Move the machine to the last position prior to the threading.
or
●
Move the machine to home position.
9 Set-up
Observe and comply with all regulations and information in this instruction
manual. Pay particular attention to all safety regulations!
All set-up work may only be carried out by appropriately instructed personnel.
Disconnect the machine from the electricity mains for all set-up work by
operating the main switch or by removing the mains plug!
9
.01
Inserting the needle
Only use needles of the system
intended for the machine, see
chapter 3 Technical Data !
Fig. 9 - 01
1
2