Pfaff Industrial 487-918/55 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 60

Pfaff Industrial 487-918/55 Скачать руководство пользователя страница 42

Input

42

Dialog window

The dialog window shows questions and additional buttons for the answers.

Enter button

Enter button

Yes for one seam program.

All button

Yes for one or all marked seam programs.

Esc button

No for one or all marked seam programs.

Next button

No for one seam program.

Machine confi guration

With the MDAT-function the machine confi guration can be copied to/from SD-Card or can be

deleted on the SD-Card (fi lename: MDAT).

Format SD-Card

The Format-function formats the SD-Card.

If the SD-Card is not readable, it is new formatted. If the SD-Card is readable and the direc-

tory \P

487

for the

487

-machine exists then all seam programs and the machine confi guration

(MDAT) are deleted in this directory.

If the directory \P

487

for the

487

-machine does not exist, only the directory \P

487

is created.

So all other fi les and directories on the SD-Card are not corrupted.

It is recommended to use SD-Cards with a maximum capacity of

2

GB.

«
...
40
41
42
43
44
...
»

Содержание 487-918/55





























































Отзывы:

Нет отзывов