Pfaff Industrial 487-918/55, Дополнение к руководству по эксплуатации и настройке, Страница: 29 / 60

Input
29
6
.01.02
Seam program input with the "Creating/adjusting a program" functionen"
With this function the seam program is entered by entering or changing the appropriate va-
lues on the control panel. This type of seam program input is particularly suitable for adjus-
ting existing seam programs.
Switch on the machine.
●
Call up the input mode.
●
Call up the "creating/adjusting a program" function.
●
Carry out the basic settings and conclude with the "Enter" function, see Chapter
●
6 . 01 . 01
Basic settings for seam program input.
Alter the fullness, see Chapter
●
4 . 02 Inputting fullness.
Alter the maximum speed for the current seam section.
●
These functions are used to scroll through the current seam program.
●
The current seam section is displayed accordingly, in addition to all the other current
values.
Enter the seam start functions, see Chapter
●
6 . 01 . 04 Entering the functions at the be-
ginning of the seam during seam programming.
Enter the functions for the end of the seam section, see Chapter
●
6 . 01 . 05 Entering the
end of the seam section when programming the seam.
Select a seam type
●
It is only possible to select the right or left seam, if the seam type "right and left seam"
was selected in the basic setting, see Chapter 6 . 01 . 01 Basic settings for seam program
input.