SECONDARY TRANSMISSION
18
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Replacing the bearings of the relay box
Crankcase
Wear gloves in order not to get burnt.
- Remove the seal.
- Using a heat gun, heat the crankcase to a
temperature between 80 and 90°C.
- Use an inertia type extractor tool to remove
the bearings.
- While the casing is expanded fit the new
bearing fully home in its housing.
- Using fitting tool P/N 757990, fit a new lightly
greased gasket (1).
Relay box cover
- Remove the seal.
- Place the cover on its gasket seat surface,
heat it (80 to 90°C) until the bearing falls out
by itself.
- While the casing is expanded fit the new
bearing fully home in its housing.
- Using fitting tool P/N 759788, fit a new lightly
greased gasket (2).
757990
1
759788
2
