Ce document est la propriété de Peugeot Sport et ne peut être reproduit ou communiqué sans autorisation.
This document is the property of Peugeot Sport and may not be copied or circulated without permission.
73
207 Spider Technical Instructions
NOT 207 SPI-80
Brakes
Draining the braking system:
Check that all the hoses in the cu circuit are correctly connected, then loosen the 4
bleeder screws. You could connect a recipient to collect the excess brake fluid
(a dedicated recipient) of each drain for all operations.
Fill the circuit until the liquid comes out of each calliper. As soon as the circuit is filled,
tighten the bleeder screws and press the brake pedal several times.
Keeping your foot on the brake, loosen one of the bleeder screws to release the air
in each calliper and press the pedal down to the limit. Repeat twice or three
times for each calliper.
Make sure that the container is always full and that the pedal becomes "hard".
Top up the level when you have drained the circuit.
Important:
Under no circumstances should the crimped ends be dismantled.
Using brake force distribution:
Use the lever on the floor to the driver's left to distribute the brake force to the front
or rear of the vehicle. As indicated on the notes on the base, to increase the
brake force on the front, turn the lever to the left. Turn it to the right to increase
the brake force to the rear.
01
Ed. :
Содержание 207 Spider
Страница 1: ...TECHNICAL INSTRUCTIONS...
