PEUGEOT 207 Spider, Технические инструкции

Страница: 58 / 77

Ce document est la propriété de Peugeot Sport et ne peut être reproduit ou communiqué sans autorisation.
This document is the property of Peugeot Sport and may not be copied or circulated without permission.
57
207 Spider Technical Instructions
NOT 207 SPI-80
Gearbox
Maintenance schedule:
This is given according to the number of kilometres run by the equipment in racing
conditions.
Mid-season
~1,100km
Replace Clutch release bearing
Each season
~2,200 km
Dismantle, reassemble,
penetrant inspection of parts
CHECK GEARBOX and Service booklet (seals, safety fastenings,
etc.)
Mid-season
~1,100km
Check and repair if required CHECK GEARBOX: dismantle/reassemble
Every 2nd meeting
~550km
Check and ensure conformity if
required
Auto-lock preload
Each overhaul Replace Differential housing cover screw
Each overhaul Replace Torque ring screw
Each overhaul Replace Shaft screws (input and secondary shafts)
Each season
~2,200 km
Replace Control springs (recoil, indexing, tappet)
Each oil change Clean Drain plugs
Each oil change Replace Drain plug seals
Each season
~2,200 km
Replace Input and secondary shaft bearings
Each season
~2,200 km
Replace Differential bearings
Each season
~2,200 km
Replace Clutch shaft
Frequency Action Item
Note:
Service packs are available, product codes:
- Service pack: KITREVST7514PS2 (safety fastenings, seal fastenings)
- Bearing pack: KITRLTST7514PS1
This schedule is subject to change over the lifecycle of the ST75-14 SPIDER 207
product.
01 Ed. :