Ce document est la propriété de Peugeot Sport et ne peut être reproduit ou communiqué sans autorisation.
This document is the property of Peugeot Sport and may not be copied or circulated without permission.
23
207 Spider Technical Instructions
NOT 207 SPI-80
Body
Unlike the genuine body parts, the spare parts given above are sold pre-drilled, but
without the fittings (quarter turn).
Please follow the following recommendations for their use.
Fitting the dzus (1/4 turn):
The body mountings on the 207 Spider are Dzus EHF 55 with S5-375 springs. The
recommended drillings are:
Each part is attached to the body with the following rivets:
- Dzus: 2 standard 3x8 aluminium rivets
-Dzus springs: 2 countersunk head 3x12 aluminium rivets
The springs are mounted on a 45° or 90° axis relative to the Dzus axis (depending on
the part).
Do a joint test after assembling the two parts. If the Dzus is too hard to tighten,
compress the spring slightly.
Note: The Dzus rivet head can be flattened.
01
Ed. :
Содержание 207 Spider
Страница 1: ...TECHNICAL INSTRUCTIONS...
