PETTIBONE Extendo 1032, Руководство оператора

Страница: 52 / 120

fORKLIfT OPERaTION
44 Extendo and Traverse Operation and Maintenance Manual
800-GO-PETTIBONE
Tires and Rims
Inspect the tires for punctures, wear and if
applicable, proper tire pressure. Check the rims for
missing lug nuts and wheel studs. NOTICE: The
tire specifications of this forklift apply to the
machine as it was tested in accordance with
asME B56.6a-1994. any replacement of tires
must meet or exceed these specifications for
sidewall stiffness.
Note: Because this machine is full-time 4-wheel
drive, when tires become worn substantially,
they should be replaced with a matched set of
four (4). This will ensure better tread life and
reduce the wear on power train components.
Inspection for Leaks
Visually inspect the area beneath the forklift for
puddles, indicating a leak. Locate the cause of the
leak and correct the problem before operating the
forklift. Recheck all fluid levels at this point.
Hydraulic fluid Level
Perform a daily check of the hydraulic oil level and
temperature as indicated on the sight glass, located
on the side of the hydraulic tank. add hydraulic oil if
necessary.
Entering the Operator’s Compartment
WaRNING! fall Hazard. Do not use the steering
wheel or arm rest as a grab handle. Proper care
should be used whenever entering or leaving the
operator’s compartment. Use the step and grab
handle provided and always keep them clear of
debris.
Operator’s seat
The operator’s seat can be adjusted to move
forward or back. The horizontal adjustment lock lever
is located under the front of the seat.
seat Position adjustment
WaRNING! Uncontrolled Movement Hazard. Do
not adjust the driver’s seat while the vehicle is
moving. Move the lock lever to the left and hold.
slide the seat forward or back to your desired 1.
position.
Release lever to lock. 2.
arm Rest
Raise the arm rest for safe entering or exiting of the
operator’s compartment.
arm Rest figure 11.
seat suspension adjustment
The adjustment for the suspension is located under
the front of the operator’s seat.
To adjust for a firmer ride, rotate the knob •
clockwise.
To adjust for a softer ride, rotate the knob •
counterclockwise.
Location of the seat adjustments 1 –
seat adjustments figure 12.