20
+1 (800) 732-2677
petsafe.com 21
Note: The receiver collar is waterproof, which can make the tone hard
to hear.
Save test light for future testing.
Note: If the test light does not flash, install a new battery and re-test.
If the test light still does not flash, contact the Customer Care Center.
Test Light Instructions
1. Make sure the receiver collar battery is
properly installed. Set the correction
level to 2 or above.
2. Hold the test light contacts to the contact
points (
I
).
3. Walk toward the boundary wire with the
contact points pointing up and holding
the receiver collar at your pet’s neck level
(
J
) until the receiver collar tones and the
I
test light flashes (
K
).
J
Bou
ndar
y Zone
Pet
Area
K
