10
+1 (800) 732-2677
petsafe.com 11
Set the Static Correction Level
Read all steps before attempting to set the static correction level.
1. Remove the clear plastic cover with the test light
tool to expose the correction level button (
D
).
2. With the battery installed, press the correction
level button and release when the receiver
indicator light lights up (
E
).
3. The receiver indicator light will emit a series of
flashes representing the static correction level.
4. Increase the static correction level by pressing
and releasing the correction level button within 5
seconds of the previous series of flashes.
5. After setting the static correction level, replace
the cover to protect the correction level button.
The static correction levels increase in strength
from 1 to 5. Pushing the correction level button
while the receiver collar is on level 5 will cause
the receiver collar to revert to level 1. Refer to the
Function and Response Table to choose the static
correction level that best fits your pet. The receiver
collar will emit a warning tone and vibrate
D
E
whenever your pet enters the warning zone, no matter what the
correction level the receiver collar is set to. If your pet continues into the
correction zone, and the receiver collar is set to level 2 or above, he will
receive a static correction.
The receiver collar is equipped to automatically increase the level of static
correction the longer your pet remains in the static correction zone if the
collar is set at level 2 or above.
The receiver indicator light acts as a low battery indicator, flashing every
4 to 5 seconds when replacement is required. Test your receiver collar
at least once a month to verify that it is functioning properly and that it
activates at the boundary wire.
Over Correction Protection
In the unlikely event that your pet “freezes” in the static correction zone,
this feature limits the static correction duration to a maximum of 30
seconds. While the system locks out further static correction, the warning
tone will continue until the pet leaves the static correction zone.
