background image

  www.petsafe.net 11

Replacement Flaps

Replace & Adjust

During extreme changes in weather, vinyl flaps can shrink during cold months and stretch in warmer months. Easily 
replace or adjust to ensure a snug fit during seasonal changes.

To Replace:

 Remove screws from the 

frame of pet door.

Remove bar and flap.

Replace new vinyl flap and position 
horizontally and vertically to fit into 
door frame. Replace existing bar and 
tighten screws in place.

To Adjust: 

Slightly loosen screws 

from frame of pet door.

Slightly move bar away from flap.

Adjust flap horizontally  
and/or vertically to fit  
into door frame. Push bar  
towards flap and tighten screws in 
place.

Replacement Parts and Accessories

To purchase replacement parts for your PetSafe

®

 Wall Entry Pet Door, contact our Customer Care Center at 1-800-

732-2677 or visit our website at www.petsafe.net.

Component

Replacement Part 

Number

Small Replacement Flap

PAC11-11037

Medium Replacement Flap

PAC11-11038

Large Replacement Flap

PAC11-11039

Small Closing Panel

MPA00-12831

Medium Closing Panel

MPA00-12832

Large Closing Panel

MPA00-12833

Installation Hardware Kit

MPA00-12641

Содержание PPA00-16942













Отзывы: