background image

  www.petsafe.net 3

IMPORTANT SAFETY INFORMATION

Explanation of Attention Words and Symbols used in this guide

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey 
all safety messages that follow this symbol to avoid possible injury or death.

WARNING

 indicates a hazardous situation which, if not avoided, could result in death or 

serious injury.

CAUTION,

 used with the safety alert symbol, indicates a hazardous situation which, if not 

avoided, could result in minor or moderate injury.

NOTICE

 is used to address safe use practices not related to personal injury.

•  When children are present in the home, it is important to consider the pet door during child proofing activities. 

The pet door may be misused by a child resulting in the child accessing potential hazards that may be on the 
other side of the pet door. Purchasers/Homeowners with swimming pools should ensure that the pet door is 
monitored at all times and that the swimming pool has adequate barriers to entry. If a new hazard is created 
inside or outside of your home, which may be accessed through the pet door, Radio Systems

®

 Corporation 

recommends that you properly guard access to the hazard or remove the pet door. The closing panel or lock, 
if applicable, is provided for aesthetic and energy efficiency purposes and is not intended as a security device. 
Radio Systems

®

 Corporation will not be liable for unintended use and the purchaser of this product accepts full 

responsibility for oversight of the opening it creates.

•  Power Tools. Risk of severe injury; follow all safety instructions for your power tools. Be sure to always wear your 

safety goggles.

•  The user, prior to installation, must become familiar with all building codes that may affect the installation of the 

pet door and determine, along with a licensed contractor, its suitability in a given installation. This pet door is not 
a fire door. It is important for the owner and contractor to consider any risks that may be present inside or outside 
of the pet door, and any risks that may be created by subsequent changes to your property and how they may 
relate to the existence and use, including misuse of the pet door. 

•  Keep these instructions with important papers; be sure to transfer these instructions to the new owner of the 

property.

•  Check for electrical/plumbing fixtures that could be in the wall where you wish to place the pet door.
•  Make sure the support fits snug and that it is not too long or too short. In either instance, damage to the wall can 

occur.

If placing screws into vinyl siding it may be necessary to drill a hole through the siding slightly larger than the heads of 
the screws. This will allow the screws to tighten flush with plywood and not buckle the vinyl siding.

Содержание PPA00-16942













Отзывы: