Version 1,15
th
March 2021, Page
1
of
4
Ezy-Drink
®
Lead Safe™ Remote Electronic
Drinking Bubbler Tap - Battery
PRODUCT CODES:
-
170.81.11.00
SPECIFICATIONS
−
Drinking taps are designed to operate at full mains pressure.
−
The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
−
Adjustable built-in flow restrictor.
IMPORTANT: All Ezy-Drink
®
remote bubbler taps are tested in accordance with AS/NZS 3718 and leave
our premises in good working order.
As ‘lead free’ is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA’s Safe Drinking Water Act
(SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines ‘lead free’ as “not mo
re than a weighted average of 0.25% lead when used with respect to the wetted surface of
pipes, pipe fittings, plumbing fittings and fixtures”.
TECHNICAL DATA
Inlet
½
” BSP - Female
Outlet
Rubber mouthguard
Headwork
Piezo Activation
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
60
Nominal Flow Rate (LPM)
1.44
Solenoid
Input Voltage
6 V DC
Power Consumption
-
Cable length
3.2m
Connection
Inlet
1/2” BSP - Female
Outlet
1/2” BSP - Male
Pressure Range
(kPa)
Min
50
Max
500
Temperature
(°C)
Min
5
Max
60
Finish
Chrome
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
