Petsafe PIF00-13652, Быстрое руководство по установке

Страница: 7 / 36

www.petsafe.net 7
• You may need to trim the hair in the area of the Contact Points. Never shave the dog’s neck; this may
lead to a rash or infection.
• Always remove your dog’s Receiver Collar before performing any Transmitter testing.
• Turn off power before changing Mode Selection Switch setting on Transmitter.
• The Receiver Collar should not be on your dog when the system is tested. Your pet may receive an
unintended correction.
• To prevent unintended corrections to your pet, test the system whenever making any adjustments to
the distance of your Warning Zone.
• If you use a collar and leash for training, be sure the extra collar does not put pressure on the contact
points.
• Never remove power from the system when the collar is on the pet. This may activate the Receiver
Collar.
• Radio Systems ® Corporation recommends the use of an Uninterruptible Power Supply (UPS) for use
with your wireless fence. Should the power go out at your home, your pet will be unprotected. Power
outages can be unpredictable, and the use of a UPS will provide you with some time to properly
restrain your pet.
• To prevent an unintended correction, after the Boundary Flags have been placed, be sure to set the
static correction on the Receiver Collar back to level 1 tone only.
• Do not charge your Receiver Collar every night. Charging too often can reduce battery life. Charge
your Receiver Collar when the Receiver Indicator Light blinks red/green; or when the light blinks red.