Petsafe PIF00-13652, Быстрое руководство по установке

Страница: 19 / 36

www.petsafe.net 19
Set the Warning Zone
After programming the boundary data, you are ready to set and test the warning zone for your pet area.
The Warning Zone width is adjustable using the System Settings menu in the BPU. The Warning Zone width
default setting is Average. The adjustable ranges are as follows:
• Min.: approximately 1 foot warning distance.
• Average: approximately 3 feet warning distance
• Max.:
approximately 5 feet warning distance
1. Connect the BPU to the Receiver Collar.
2. On the BPU, select System Settings.
3. Set the Warning Zone width to the Min. setting. If you have a smaller yard and would like to maximize
your Pet Area. Keep in mind that your dog will have very little warning before the higher level of Run
Through Prevention Static Correction is generated. This setting would also be appropriate if you have a
stubborn dog.
4. If you have a very timid dog, consider setting the Warning Zone width to Max. to allow more distance
before the higher level Run-Through Prevention Static Correction is generated.
Step
5