Petsafe PIF00-13652, Быстрое руководство по установке

Страница: 23 / 36

www.petsafe.net 23
5. Check the tightness of the Receiver Collar by
inserting one finger between the end of a Contact
Point and your pet’s neck. The fit should be snug but
not constricting ( 6C ).
6. Allow your pet to wear the collar for several minutes
then recheck the fit. Check the fit again as your pet
becomes more comfortable with the Receiver Collar.
7. Trim the collar as follows ( 6D ):
a. Mark the desired length of the Receiver Collar
with a pen. Allow for growth if your pet is young
or grows a thick winter coat.
b. Remove the Receiver Collar from your pet and
cut off the excess.
c. Before placing the Receiver Collar back onto your
pet, seal the edge of the cut collar by applying a
flame along the frayed edge.
6D
6C