Petsafe PIF00-13652, Быстрое руководство по установке

Страница: 10 / 36

10 1-800-732-2677 www.petsafe.net 11
Operating Guide
Charge the Receiver Collar
Do not charge your Receiver Collar every night. Frequent charging can have a negative
effect on the battery life. We recommend that the Receiver Collar be used until the
Receiver Indicator Light blinks red/green or red.
To Charge the Receiver Collar
1. Lift the rubber cover protecting the Receiver Charging Jack.
2. Connect the Receiver Collar Charger connector to the Receiver
Charging Jack. Note: The connector only fits one way, do not force it
into the charging jack.
3. Plug the Receiver Collar Charger into a standard AC wall outlet. The
Receiver Collar light will glow red when the charger is properly seated
and charging.
4. Charge the Receiver Collar for 2-3 hours. The light will turn green
when charging is complete. A built in safety circuit prevents the
Receiver Collar from overcharging.
1A
5. After charging, replace the rubber cover to protect the Receiving Charging Jack. The Receiver Collar
must be fully charged prior to programming a Boundary. Each charge can last from approximately 10 to
14 days depending upon frequency of use.
Step
1