Petsafe PIF00-13652, Быстрое руководство по установке

Страница: 28 / 36

28 1-800-732-2677 www.petsafe.net 29
The Receiver Collar is beeping
but my pet is not responding to
the Static Correction.
• Make sure the Static Correction Level is set at 2 or above.
• Test the Receiver Collar with the Test Light.
• If the Test Light flashes, check the fit of the Receiver Collar.
• Trim your pet’s fur where the Contact Points touch the neck and/or switch to the
longer Contact Points.
• Contact Points must be in contact with dog’s skin.
• Increase the Static Correction Level.
• Repeat training steps to reinforce training.
My pet reacts strongly to
the Static Correction and has
become fearful.
• Lower the Static Correction Level.
• Make sure you are in control of the situation when your pet receives his first
Static Corrections (have him on a leash attached to a separate, non-metallic
collar) and lead him into the Pet Area and praise him. If your pet remains fearful,
suspend training and start again the next day. Make sure to end all training
sessions on a positive note with lots of praise and play.
• Make sure the Transmitter Power Switch is turned on.
The Receiver Collar has injured
my pet’s neck.
• Failing to follow the important safety information at the front of the Operating
and Training Guide has caused pressure ulcers. Some descriptions of advanced
pressure ulcers describe the sores as looking like burns on the dog’s neck. Be
assured that electronic collars do not use enough energy to create electrical
burns. The energy in an output pulse is only a few thousandths of a Joule; it is
similar in nature to the static pulse that you may feel when you touch a door
knob. In some cases, pressure ulcers are described as chemical burns. The
battery in your Receiver Collar is sealed, in addition, your collar’s housing is also
sealed. This redundant sealing makes it virtually impossible, without misuse or
abuse, for your Receiver Collar battery to leak onto your pet’s neck. Please review
and follow the important safety information on pages 6-7, and the instructions in
Step 6 under the heading “Fit the Receiver Collar” on pages 22-23.