www.petsafe.net 9
Battery Indicator
Battery is at
2
⁄
3
to Full capacity.
Remote is fully functional.
Battery is at
1
⁄
3
capacity. Remote
is still fully functional.
Battery is at
1
⁄
6
capacity. Remote will
operate the Receiver, but should be
recharged as soon as possible.
Battery is almost dead. Remote
is unable to operate the
Receiver.
When the Battery Indicator shows the low battery symbol (
1
⁄
6
capacity), recharge your Remote soon.
When the battery outline is displayed, the Remote’s battery is unable to power transmissions to the
Receiver. Remote must be recharged to regain operation.
Handheld Remote Functions for Dog 1
Remote Function
Button Color
Digital Display Response
Upper Left Button
Green
Tone Only
Lower Left Button
Purple
Spray
Upper Right Button
Grey
Spray level Up
Lower Right Button
Grey
Spray level Down
Boost Button
Red
+2 above selected Spray Level
See Two Dog System on page 13 for Handheld Remote functions in Dog 2 mode.
Handheld Remote Belt Clip
To remove:
1. Press and hold the Release Lever on the Belt Clip, pulling away from the Remote.
2. Slide the Belt Clip out of the insert.
To replace:
1. Slide the Belt Clip into the insert until it clicks, locking into place.
Step 2
Prepare the Receiver Collar
Charge the Receiver Collar
1. Lift the rubber cover protecting the Receiver Collar
Charging Jack.
2. Connect the charger connector to the Receiver Collar
Charging Jack (
2A).
3. Plug the charger into a standard wall outlet.
4. Charge the Receiver Collar until the Green Indicator Light
comes on and is solid. Recharges take only 4-5 hours.
5. When charging is completed replace the rubber cover.
Charger connector
placed in the Receiver
Collar Charging Jack
2A
