GET
TING ST
AR
TED
GET
TING ST
AR
TED
14
Customer Care Center 1-800-732-2677
see “Replacement Parts and Accessories”).
*
If installing in a wall, are there any objects such as doors than could open onto the PASSport
™
once installed?
Want Professional Installation Help?
Invisible Fence
®
Brand installers (where available) may come to your home and install your new PetSafe
®
Pet Door
for an additional cost. Contact the Customer Care Center at 1-877-866-DOGS (3647) or visit the website at www.
invisiblefence.com for more information.
Tools Needed
• Hammer
• Jigsaw
(with appropriate blade type and size,
i.e. metal blade for metal door)
• Phillips Screwdriver
• Slotted Screwdriver
• Drill
• ½” Drill Bit
• Level
• Tape Measure
• Masking or Painter Tape
•Duct Tape
• String
• Pencil
• Safety Equipment
•
optional:
Caulk
Installation in a Non-Glass Door
Determine Pet Door Location
Remove power adapter from PASSport
™
or optional rechargeable
battery if using prior to proceeding with installation.
1A
Measure and mark your pet’s shoulder height on the interior side of door.
1B
Determine location for the pet door. Draw a vertical center line through the
shoulder height line using a level.
Helpful Tip:
Mark shoulder height and vertical center line lightly with a pencil .
or on a piece of tape so marks can easily be erased or removed.
NOTICE
Read this entire guide prior to cutting or modifying an opening in your door or wall. Do not proceed with cut-out or
installation until your PASSport
™
Door is assembled, powered up, programmed for your pet, and all steps under
“Prepare, Test and Setup” have been completed.
Step
1
If homeowner’s door or other application is not level,
the pet door must be marked level to swing properly.
NOTICE
1A
1B
