Peter electronic VersiStart II 11L Series, Инструкции по сборке и пусконаладке

Страница: 16 / 22

VersiStart II 3 ... 15L .. 15
15. Installation guideline
15.1 Connection
The device is to be installed according to the attached connection diagram. For other connections
please consult PETER electronic GmbH & Co. KG.
Note: Further connection diagrams for special circuit arrangements are available on our
homepage at
www.peter-electronic.com .
Note: Prior to putting the VersiStart II into operation the wiring is to be checked.
15.2 EMC
The limit values for emitted interference according to the applicable device standards do not rule
out the possibility that receivers and susceptible electronic devices within a radius of 10m are
subjected to interference.
If such interference, that is definitely attributable to the operation of the soft starters , occurs, the
emitted interference can be reduced by taking appropriate measures.
Such measures are, e.g.:
to connect reactors (3mH) or a suitable mains filter in series before the soft starter, or to connect -
capacitors (0,15µF) in parallel to the supply voltage terminals.