Perreaux eloquence 250i, Руководство пользователя

Страница: 32 / 34

29
Please record the serial number of your éloquence 250i integrated amplifier
for future reference.
Serial Number: _________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
Installation Notes Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
Check the mains fuse of the amplifier.
Check fuse in the mains plug or adaptor.
There is no sound
Check that the source component is properly connected.
Check that the source component playing.
Check that the speakers are properly connected.
Make sure the amplifier is not muted.
There is no sound on one channel
Ensure the balance control is in the correct position.
Check speaker connections.
Check interconnects.
There is a loud buzz or hum
Ensure no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the amplifier.
Unable to make or play tape recordings
Check TAPE OUT has been connected correctly.
There is weak bass or diffused stereo imaging
Ensure the speakers are not wired out of phase.
Protection message on display
See section on éloquence protection system.
The remote handset will not function
Check that the battery has not expired.
Ensure that nothing is blocking the remote sensor.