
Technical Specifications
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical measure-
ments must be subject to qualitative as well as quantitative interpretation.
Measurements of the éloquence 250i reveal excellent results by any standards.
All specifications are accurate at the time of printing. Perreaux Industries
Ltd. reserves the right to adjust specifications without notice. All specifica-
tions measured at 230V after a 10 minute warm up period.
Rated Power Output:
250Wrms per channel into 8Ω
500Wrms per channel into 4Ω
Maximum Power Output:
360Wrms per channel into 8Ω
530Wrms per channel into 4Ω
Output Voltage:
Amplifier
52 Vrms
Pre Outs
7.8 Vrms
Tape Outs
7.8 Vrms
Frequency Response:
Amplifier
+0dB, -0.1dB from 20Hz to 20kHz
+0dB, -0.6dB from 10Hz to 60kHz
Preamplifier
+0dB, -0.05dB from 20Hz to 20kHz
+0dB, -0.15dB from 10Hz to 60kHz
Distortion (THD + noise):
Amplifier
0.002%, 1kHz at 1W into 8Ω
<0.01%, 20Hz to 20kHz at 1W into 8Ω
0.002%, 1kHz at 250W into 8Ω
<0.01%, 20Hz to 20kHz at 250W into 8Ω
Preamplifier
0.001%,1kHz (RCA)
<0.002%, 20Hz to 20kHz (RCA)
0.001%,1kHz (XLR)
<0.002%, 20Hz to 20kHz (XLR)
Signal to Noise Ratio (unweighted):
Amplifier
better than 98dB, ref. rated output into 8Ω
Unbalanced Inputs
120dB, ref. 1Vrms at 0dB (RCA)
Balanced Inputs
120dB, ref. 1Vrms at 0dB (XLR)
Damping Factor:
800 at 1kHZ
Slew Rate:
+55V/µS, -55V/µS
Maximum Current:
Continuous (electronically limited)
23Arms
Short duration
45Arms
Input Sensitivity:
1.65Vrms for rated output
Input Impedance:
Unbalanced Inputs
10kΩ (RCA)
Balanced Inputs
20kΩ (XLR)
Main Inputs
33kΩ (RCA)
Input Overload:
Unbalanced Input
7.8Vrms (RCA)
Balanced Inputs
7.8Vrms (XLR)
27
Содержание eloquence 250i
Страница 1: ...Owners Manual loquence 250i Integrated Amplifier PERREAUX...
Страница 2: ......
Страница 3: ...loquence 250i Integrated Amplifier Designed and Manufactured in Dunedin New Zealand...
Страница 34: ...143mm 5 6 363mm 14 3 425mm 16 7 31...