Perreaux eloquence 250i, Руководство пользователя

Страница: 25 / 34

22
Mute Level
The mute level menu allows you to select the level of attenuation the mute level employs when it is
engaged. Selecting MUTED will attenuate the output entirely, whilst -10.0dB, -20.0dB, -30.0dB and
-40.0dB will attenuate the output by the respective level.
The factory default mute level is -40.0dB.
Bypass
The bypass menu allows you to select if the volume control is bypassed for any of the analogue inputs.
When a bypassed input is selected, it becomes a unity gain (00.0dB) input and the volume control of
the éloquence 250i is disabled.
This is useful in situations where the éloquence 250i is being used to pass through a signal from a
component with its own volume control, for example a surround processor or receiver. Care should be
taken to adjust the volume control of the other component before selecting a bypassed input, as the
resulting volume level may be uncomfortably loud.
Note:
INPUT 4 has the volume bypassed straight from the factory, and by default is set to be used as
a home theatre loop (HT LOOP).
Headphone Configuration
The headphone amplifier in your éloquence 250i can be customised to ensure your headphones seam-
lessly integrate into your system.
Volume Trim
The volume trim screen allows the volume level of the headphone output to be adjusted up or down to
compensate for the different outputs of different headphone types.
The factory default headphone volume trim is ±00.0dB.
Headphone Balance
The headphone balance screen gives you fine control over the relative volumes of the Left and Right
channels. The volume of one channel relative to the other can be changed in increments of 0.5dB, up
to 40.0dB – beyond this; the output of the reduced channel will be muted entirely.
The factory default headphone balance is 00.0dB.